Jiangmen Dongxu metal material Co., Ltd

Guangdong Jiangmen Dongxu metal material Co., Ltd., after more than ten years of efforts and development, has established its processing plants "Jiangmen Pengjiang ASEAN stainless steel processing center" and "Jiangmen Jiangming stainless steel material Co., Ltd."-- Is a stainless steel (roll) plate raw material production, processing, sales and supporting services in one enterprise. Founded in August 2006, the company was rated as a local "A-level tax paying enterprise" in 2015, 2016 and 2018 respectively. Jiangming company passed the certification of "Guangdong high tech enterprise" in 2018 and passed the ISO9000 international system certification.

The head office and its subordinate companies have become comprehensive enterprises of stainless steel plate (roll), stainless steel surface oil grinding sand (snowflake sand), stainless steel surface wire drawing (ruled sand), stainless steel surface anti fingerprint (color, natural color oil), stainless steel mirror smooth roll grinding and flat grinding (8K, 12K), stainless steel strip straight series supporting processing and stainless steel raw material sales.

The main production, sales and processing of various stainless steel materials are: stainless steel plate, coil, strip, stainless steel spring, stainless steel pipe and so on. Materials: SUS316, 316L, 321, 304, 304L, 201, 202, 443, 430, 409, 410 series and other materials. Products adapt to the scope of the industry; Electronics, electrical appliances, sinks, kitchenware, hardware, bathroom, pipe, machinery, containers and other areas that need stainless steel. The thickness of the materials sold ranges from 0.15mm to 30.0mm, and the width of the strips ranges from 3.5mm to 1500mm. The hardness of the materials includes eh, h, 3 / 4h, 1 / 2H and 1 / 4H.

The slitting production line of Jiangmen ASEAN stainless steel machining center adopts imported turret, the slitting accuracy can reach 0.01mm, and the narrow product width can be divided into 3.5mm. There is no burr and sickle bend on the edge. Is the welded pipe industry, hardware and electrical industry suppliers.

The straight production line of the processing plant has flat plate, no burr on the knife edge, and the diagonal accuracy can reach below 0.2mm. The length of the shear plate is controlled by servo motor made in Japan. The air support lamination is adopted for the material receiving, and the pneumatic beating method is adopted for the front, back, left and right sides, so the lamination is neat, and the quality phenomenon such as scratch will not be caused to the plate.

The oil mill (snowflake sand, ruled sand) production line of the processing plant is produced by frequency conversion motor with more than 3000 speed. The surface of oil mill snowflake sand, ruled sand and stainless steel is not only smooth, no pressure point, fine sand grain, but also colorful. Rolling and flat grinding can be carried out as required.

The stainless steel surface of the processing plant is anti fingerprint (color, transparent natural color oil), which is controlled by constant temperature and constant speed. The fully automatic rolling plate oil coating production is adopted. The oiling cots are processed by three continuous anti fingerprint (oil coating), which can realize the rolling plate and flat plate oil coating processing and dust-free workshop production. The steel plate can pass the adhesion test of 100 grid knife and 240 hours salt spray test. The surface is bright, the oil layer is uniform and smooth, the oil quality is obvious, and the surface is free of impurities.

The stainless steel mirror rolling mill and flat mill (8K, 12K) production line of the processing plant can produce 8K products without grinding head lines and sand holes, equipped with full-automatic mirror production line grinding head, and the production line meets the requirements of environmental protection. Automatic manipulator up and down plate processing operation. The 8K and 12K products are produced without grinding head and pitting. It can realize the direct rolling and flat processing.

The single manual manual grinding 12K production line can completely polish and partially repair the surface of 2B and BA stainless steel, and the quality can reach 8K and 12K. Is the elevator board, bathroom shower and other mirror light demand industry choice.

Jiangmen Jiangming stainless steel material Co., Ltd. is a subsidiary of Jiangmen Jiangming stainless steel material Co., Ltd., which processes sheet metal, laser cutting, metal stamping, metal products lifting and special-shaped metal parts. The company has imported laser cutting machines, fine CNC plate shears, CNC automatic bending machines, hydraulic lifting machines and automatic punching machines. The company has long-term cooperation with many large domestic enterprises, Long term inventory of more than 2000 tons, can be delivered on the same day, door-to-door. The company strives to serve new and old customers wholeheartedly with quality and price.